How Much Does a Table Saw Cost? 2026 Price Guide

By Finlay Connolly

The Short Answer

A decent table saw costs somewhere between $200 and $750 for most home woodworkers and DIYers, with $600 to $650 landing you a genuinely solid jobsite saw that will handle years of regular use. Go cheaper than $150 and you’re usually looking at a toy, not a real tool. Go north of $1,500 and you’re into hybrid and cabinet saw territory built for serious shop work, with true cabinet saws regularly running $1,500 to $4,000 and up. Sliding table saws and premium European brands can push well past $5,000.

That’s the number most people actually came here for. The rest of this article breaks down exactly what you get at each price point, what real saws cost right now, and the extra costs that catch a lot of first-time buyers off guard.

What You’ll Actually Pay, by Category

Category	Typical Price	Real Examples	Best For
Toy or craft saws	Under $100	Small desktop mini saws	Hobby crafts only, not real woodworking
Entry-level benchtop	$150 to $350	Delta ShopMaster, SKIL TS6328-00	Occasional DIY, testing the hobby
Solid jobsite saw	$350 to $750	DeWalt DWE7491RS, Ridgid R4514, Bosch 4100XC-10	Contractors, serious DIYers
Hybrid saw	$850 to $1,100	Grizzly G0715P, Shop Fox W1837, SawStop CTS	Committed hobbyists, small shops
Cabinet saw	$1,500 to $4,000+	Grizzly G0690, SawStop Professional Cabinet Saw	Serious shops, daily professional use
Sliding table saw	$2,000 to $10,000+	Entry sliders, Felder, Hammer	Panel processing, production cabinet shops

Under $150: Be Careful Here

At this price, you’re usually not buying a real table saw, you’re buying something shaped like one. Tiny desktop saws in this range are fine for small craft projects, model making, or cutting thin material for hobby work, but they don’t have the power, table size, or fence accuracy to do real woodworking. If a listing looks too good to be true at this price point, it probably is.

$150 to $350: Entry-Level, But Some Are Genuinely Good

This is where real table saws start, and current pricing on actual current products backs that up. A Delta ShopMaster 10-inch portable runs around $194, and the SKIL TS6328-00, a 13-amp compact saw with a rack-and-pinion fence, sits right around $228. These aren’t toys. They have real fences and real motors, just less power and a smaller footprint than you’d get spending more. For occasional DIY use, shelving, small furniture, general home projects, saws in this range genuinely get the job done.

$350 to $750: The Sweet Spot for Most Buyers

This is where most contractors and serious hobbyists actually land, and it’s the range where you start seeing real rack-and-pinion fences, bigger rip capacities, and motors that won’t bog down on hardwood. The DeWalt DWE7491RS runs around $649, Ridgid’s R4514 and Bosch’s 4100XC-10 both land near $599, and SKIL’s heavy-duty worm drive model comes in around $749. If you’re only going to buy one table saw and want it to last, this is genuinely the range to shop in. Our Best Portable Table Saw Under $500 guide and our Best Table Saws Under $1,000 guide both cover specific picks across this exact range.

$850 to $1,100: Hybrid Saws

Once you cross into this range, you’re often paying for a genuinely different kind of saw, not just a bigger motor. Hybrid saws like the Grizzly G0715P, typically priced between $859 and $999, and the Shop Fox W1837 use cabinet-mounted trunnions, the same design full cabinet saws use to hold their accuracy for years rather than months. SawStop’s compact saw with flesh-detection safety technology also lands in this range, generally listed around $899 to $974 depending on the retailer. Our Best Hybrid Table Saws Under $1,000 guide covers exactly what you’re paying extra for at this level.

$1,500 and Up: Cabinet Saws

True cabinet saws are a real financial commitment, and the pricing reflects it. Grizzly’s G0690 typically runs $1,525 to $2,020 depending on the year and retailer, and SawStop’s full Professional Cabinet Saw, complete with a 30-inch fence, can run close to $3,876 for a well-equipped configuration. These saws run on 220V power, weigh several hundred pounds, and are built for daily use in a serious shop, not weekend projects. Our Best Cabinet Table Saw guide covers this tier in more depth if you’re shopping here.

$2,000 and Up: Sliding Table Saws

Sliding table saws, sometimes called panel saws, occupy their own price bracket entirely. Entry-level sliders start around $2,000 to $3,000, while premium European brands like Felder and Hammer routinely start above $5,000 and climb well beyond that for larger machines. This category is really built for panel processing and production cabinet work, not typical home shop use, and the price reflects a genuinely different scale of equipment.

The Extra Costs Nobody Mentions Upfront

The sticker price on a table saw is rarely the whole story, and this is where a lot of first-time buyers get caught off guard.

The Stand Might Cost Extra

Some saws, including SawStop’s compact model, sell the folding stand as a separate accessory rather than bundling it in, and that stand alone can run $150 or more. Always check whether the price you’re looking at actually includes a stand before comparing it against a competitor that does.

A Better Blade

The blade that comes with most saws is usable but not great. A quality upgrade blade generally runs $30 to $100, and it’s one of the cheapest ways to noticeably improve your cut quality. Our Table Saw Accessories guide covers this and other add-ons worth budgeting for.

Dado Sets and Throat Plates

Not every saw comes ready for dado cuts out of the box. Some need a separate dado-compatible throat plate, and the dado blade stack itself is a separate purchase, often $50 to $150 depending on quality.

A Fence Upgrade

If you land on a saw with a known weak stock fence, budget for the possibility of upgrading it later. Aftermarket fences from established names like Vega or Biesemeyer typically run $300 to $500 or more.

Electrical Work

Cabinet saws and some hybrid saws run on 220V power, which not every garage or shop already has. If you need an electrician to add that circuit, that’s a real cost to factor in before you’re comparing sticker prices apples to apples.

Shipping

Heavier saws, especially cabinet saws in the 300 to 500 pound range, sometimes ship freight rather than standard parcel delivery, and that shipping cost isn’t always included in the listed price. Check this before assuming the online price is the final price.

A Few Common Mistakes

• Comparing prices without checking whether a stand, blade, or accessories are actually included
• Buying a saw priced well under $150 expecting real woodworking capability
• Not budgeting for a 220V circuit before buying a saw that requires one
• Assuming a higher price always means more rip capacity, when sometimes it just means more built-in safety technology or accuracy
• Skipping the cost of a better blade and judging a saw’s cut quality by its cheap stock blade instead
• Overlooking freight shipping costs on heavy cabinet saws

A Few Quick Questions

Is it worth spending more than $500 on a table saw?

For most people doing regular woodworking or home projects, yes. The jump from a $200 saw to a $600 saw usually buys real improvements: a fence that actually holds its setting, a motor that won’t bog down on hardwood, and a bigger rip capacity for sheet goods. Past $650 or so, you’re paying more for long-term durability and precision than for basic capability.

Why do some table saws cost 10 times more than others?

The biggest jumps in price usually buy accuracy that holds up over years rather than months, more raw power, safety technology like flesh-detection, or a completely different design built around production-level panel processing. A $200 saw and a $4,000 saw can both make a straight cut on day one. The expensive saw is built to still be making that same accurate cut after a decade of daily use.

Do I need a cabinet saw, or is a jobsite saw enough?

For most home woodworkers and even many professionals, a good jobsite saw in the $350 to $750 range covers the vast majority of projects. Cabinet saws make the most sense once you need daily, sustained accuracy, heavier cutting power, or you’re running a shop rather than doing occasional projects.

What’s the cheapest table saw that’s actually worth buying?

Real current pricing puts saws like the Delta ShopMaster around $194 and the SKIL TS6328-00 around $228 as genuine, usable table saws rather than toys. Below roughly $150, quality drops off fast, and you’re better off saving a bit longer than buying something that won’t hold a straight cut.

Does a more expensive table saw mean better safety?

Not automatically, but some of the price increase at certain tiers does buy real safety technology, like SawStop’s flesh-detection system, which is a genuine, verifiable difference rather than just marketing. Riving knives and blade guards, which matter for basic safety, are standard across almost all price tiers today, not just expensive ones.

The Bottom Line

Most people looking for a real table saw should expect to spend somewhere between $350 and $750 for something that will genuinely last. Go lower and you’re accepting real compromises in accuracy and durability. Go higher and you’re paying for precision, power, or safety technology that matters most once your projects get serious or your saw sees daily use. Whatever budget you land on, factor in the blade, the stand, and any accessories before comparing prices side by side, since the sticker price is rarely the full cost of actually getting the saw cutting.